(Refurbished) 67 LB Wax Melter for Candle Making
Refurbished Super Large Wax Melter for Candle Making: 65-67 LB Electric Aluminum Wax Melting Pot Machine + Lid Please Note: This listing is for a used or refurbished wax melter with our improved [...]
Sandblasting Rock Membership was down but now fixed
Hi Do-It-Yourselfer Our membership site on rock sandblasting encountered a technical issue resulting in folks not being able to view the site and login. I am so sorry this happened and just realized it yesterday. [...]
Regular Spout vs Larger Spout for Wax Melters
We offer two different spout size options for the candle wax melters. These are made of brass which have good heat conductivity to reduce wax clogs. The regular spout size is shown on the left [...]
Instructions for the 42 LB Pro Melter Model 1 Upgraded to Model 2 Heating Element Conversion
Heating Element Conversion Instructions from Old Model 1 to Newer Model 2 Upgraded heating element kit for the 42 LB Pro Melter. These are our new heating elements packaged in all new models released in [...]
Determining if you Have the Model 1 or 2 Thermostat for the PRO Melters
Around November 2023 we installed the large PRO Aluminum model melters with an updated heating element, which is much improved and longer lasting. We titled the new melters, the Model 2. It's heating element requires [...]
Super Large 65 LB Wax Melter + Lid for Candle Making: Aluminum Electric Wax Melting Pot
Super Large Wax Melter for Candle Making: 65-67 LB Electric Aluminum Wax Melting Pot Machine + Lid WAX MELTING POT with 65-67 LBS CAPACITY of WAX! SUPER-FAST Technology can melt Soy Wax, Paraffin, [...]
Barb Hose Fittings to Connect Sandblaster Nozzle with 1/2″ ID or 3/8″ ID Hose
Hey Do-It-Yourselfer, You may be interested in our new post titled: Barb Hose Fittings to Connect Sandblaster Nozzle with 1/2″ ID or 3/8″ ID Hose and can be seen below. Please check it out and [...]
About Our Kennametal Nozzle Listings
Hey Do-It-Yourselfer, You may be interested in our new post titled: About Our Kennametal Nozzle Listings and can be seen below. Please check it out and leave me any comments or questions below this article: [...]
My apology on this…. sorry
Hi Do-It-Yourselfer I'd like to apologize to you for my miscommunication on some of our sandblaster nozzles manufactured by Kennametal. We have had a few customers mistakenly (but understandingly) say our nozzles were knock-offs but [...]